Zendaya B

. Women’s Sculpting Gym Set — Leggings & Sports Bra

Jul 2026 - Present • 2 mos

The brief was to develop a matching gym set that looked minimal but had a sculpted, performance-focused fit. I started by studying the reference silhouette and identifying where the seams could naturally follow the body without making the garment visually busy. I developed the front and back technical flats, mapped the panel lines, waistband construction, gusset area, and sports-bra support structure. I then worked through the measurements and created a size specification that kept the proportions consistent across the set. For the tech pack, I documented the fabric requirements, elastic placement, stitching, seam construction, labels, colorway, and BOM, with close attention to the areas most likely to affect fit during sampling. Deliverable: Complete activewear tech pack with technical drawings, measurements, construction details, colorway and BOM.

Men’s Performance Training Set — Compression Top & Shorts

May 2026 - Present • 4 mos

This project was less about aesthetics and more about how the garment would perform during movement. The concept involved a fitted men's training top paired with performance shorts. I broke the garments down section by section, deciding where different panels, seams, and stretch zones would work best for mobility. I created detailed technical drawings for both garments, specified the placement of reflective details and branding, and documented the waistband, pocket construction, hems, binding and stitching. The measurements were then organized into a clear specification sheet for sampling. Rather than treating the top and shorts as separate products, I developed them as one coordinated training set so the proportions, branding and construction language stayed consistent. Deliverable: Men’s sportswear tech pack covering the compression top and performance shorts

Women’s Compression Activewear — Long-Sleeve Top & Leggings

Aug 2026 - Sep 2026 • 1 mo

This was a more technical activewear project where fit and fabric behaviour were central to the development. I began by breaking down the compression silhouette and identifying the key body zones that needed clean panel transitions. The leggings were mapped around the waistband, side panels and lower-leg construction, while the top was developed around the neckline, sleeve structure and body panels. Once the construction was established, I created the technical drawings and measurement specifications, followed by detailed notes covering stretch fabric requirements, seam finishing, elastic, hems and branding placement. I then assembled the BOM and colorway information into the final fashion tech pack, making sure the technical information supported the original visual concept rather than overwhelming it. Deliverable: Detailed women’s compression-wear tech pack for production and sampling.