Parcourir les catégories
Français
$
USD
Connectez-vous à votre IA
I will design pcb schematic layout raspberry pi compute module cm4 cm5 carrier board io
PCB Engineer ESP32 Raspberry Pi CM4 CM5 Automotive ECU RF Buck Boost Converter
Am a professional PCB designer specializing I design Raspberry Pi CM4 and CM5 carrier boards, ESP32 based LED driver PCBs with DMX, DALI, and WiFi control, and automotive ECU firmware and PCB repair. ...
À propos de ce service
Need a Raspberry Pi CM4 or CM5 Carrier Board PCB designed with schematic, layout, and Gerber files? I deliver the complete package.
I design custom CM4 and CM5 carrier and IO boards from minimal breakout designs to full-featured boards with PCIe, USB3, HDMI, CSI/DSI, and Gigabit Ethernet routing.
WHAT I DESIGN:
- CM4 / CM5 carrier board schematic & PCB layout
- IO board design with all standard interfaces
- PCIe, USB3, HDMI, CSI & Ethernet routing
- Power management USB C PD, PMIC & LDO
- 4-layer design with impedance control
- Gerber, BOM & drill files manufacture-ready
EVERY ORDER INCLUDES:
- Full schematic & PCB layout source files
- Manufacture ready Gerber file package
- BOM & assembly documentation
- Free revisions until manufacture ready
Your CM4/CM5 carrier board designed precisely for your application.
Message me your interface requirements before ordering!
FAQ
What interfaces can you include on the CM4/CM5 carrier board?
PCIe Gen 2/3, USB 3.0/2.0, Gigabit Ethernet, HDMI 2.0, CSI camera, DSI display, 40 pin GPIO, M.2 NVMe, USB C PD, RTC, CAN Bus, RS-485, and custom industrial I/O. Tell me your required interfaces and I'll confirm scope before you order.
How many layers does a CM4/CM5 carrier board need?
Minimum 4 layers 2 signal layers plus dedicated ground and power planes. For designs with PCIe, USB 3.0, and HDMI, 4 layer with controlled impedance is standard. I'll confirm the right stackup after reviewing your interface requirements.
Do you handle the 200 pin high density CM4 connector routing?
Yes. I route the full 200 pin CM4/CM5 breakout differential pairs for PCIe, USB, HDMI, CSI/DSI with correct impedance matching, length tuning, and reference plane continuity for reliable signal integrity.
Can you design a custom form factor carrier board?
Yes. I design boards in any form factor mini ITX, HAT size, compact industrial, panel mount, or fully custom. I match mounting hole patterns, connector cutouts, and enclosure fit requirements to your mechanical spec.
Do you design the power supply section for the CM4/CM5?
Yes. CM4/CM5 requires 5V regulated input. I design full power sections USB C PD input, DC barrel, PMIC, 3.3V and 1.8V LDOs, and power sequencing ensuring stable operation across all interfaces.
What PCB software do you use for CM4/CM5 carrier design?
I design primarily in KiCad and Altium Designer. KiCad is free for you to edit after delivery. For Altium files, I deliver the native project so your team can modify it. I also support EasyEDA if you're ordering from JLCPCB.
Will the design pass DFM and be ready to fabricate?
Yes. All designs are DRC and DFM verified against JLCPCB and PCBWay rules. Gerber files, drill files, BOM, and stackup spec are delivered ready to upload no modifications needed at the fab house.
