I will build flutter ble mobile app for esp32, nrf52840 iot device


À propos de ce service
I build stable cross-platform BLE (Bluetooth Low Energy) mobile apps for your ESP32 / nRF52840 IoT hardware.
I have deep embedded experience with BLE GATT, data read/write, auto-reconnect, sensor data display and device control.
Supported chips:
ESP32, ESP32-S3, ESP32-C3, nRF52840, nRF5340, STM32WB
Note: BK series Bluetooth chips are not my main service. Message me first if you use BK chips.
What I can do:
- BLE scan, connect, disconnect, auto reconnection
- Read sensor data (temperature, humidity, voltage, current etc.)
- Send control commands to your hardware
- Data log / simple chart display
- WiFi provisioning for ESP32 via BLE
- Clean Flutter source code with comments
- APK test build + iOS test build
️ Important before you order:
1. You need to provide your BLE UUID, service & characteristic definition, data protocol.
2. This gig only includes mobile APP development. It does NOT include firmware development unless you buy extra add-on.
3. App Store / Google Play publishing is NOT included in base packages. Publishing is an extra service, and I do NOT guarantee audit approval.
4. Scope creep / new features after order will be quoted separately.
5. I test based on your hardw
Découvrez ZhangWenHao
Engage in translation, writing, coding, etc
- DeChine
- Membre depuisnov. 2024
- Temps de réponse moy.1 heure
Langues
Anglais, Chinois
FAQ
What info do you need to start?
BLE service UUID, characteristic UUID, data protocol document, hardware photo.
Can you develop the ESP32 firmware as well?
Yes, firmware is available as extra add-on.
Will you help me upload to App Store?
Publishing is an extra service. I cannot guarantee Apple / Google audit pass.
Do you support BK9568 / BK3432?
BK chips are rare in overseas market. Message me first, extra cost may apply.
Can the app work both Android and iOS?
Yes, Flutter cross-platform for both Android and iOS.

