p
prateek_ishwar

Prateek Kumar

@prateek_ishwar

Mechanical Design Engineer

Inde
Anglais, Hindi
Certaines informations sont présentées en anglais.
À propos de moi
I am a Mechanical Engineering student with hands-on experience in mechanical design, FEA, and vehicle dynamics. I have completed research internships at IIT Delhi, IIT Guwahati, and IIT Bhubaneswar focusing on underwater vehicles and exoskeleton control. I am proficient in SolidWorks, ANSYS, ROS 2, and MATLAB/Simulink.... Plus d’infos

Compétences

p
prateek_ishwar
Prateek Kumar
hors ligne • 

Voir mes services

Processus complet de conception
I will ansys fea analysis and 3d cad modeling in solidworks

Expérience professionnelle

IIT(Institute_of Information Technology)

INTERN

IIT(Institute of Information Technology) • Temps plein

Jul 2026 - Oct 2026 • 3 mos

ORION: Oceanic Robotic Intelligence for Observation and Navigation (AUV with 4-DOF manipulator) • Designed the 3D CAD model of an autonomous underwater vehicle with a 4-DOF manipulator arm, covering hull, thrusters and arm assembly, as the base for structural analysis and simulation. • Worked across CAD, structural analysis, ROS 2/Gazebo and MATLAB, and helped reduce scope after the first review so all four modules were delivered

Suvidha_Foundation

INTERN

Suvidha Foundation • Temps plein

May 2026 - Jul 2026 • 2 mos

Product Design Intern — Suvidha Mahila Mandal NGO (Remote) CAD, CAEand Product Prototype Development 05/2026– 07/2026 • Designed the VUV Activator product from concept to prototype, developing mechanical components in SolidWorks and Fusion 360 and validating structural integrity via finite element analysis. • Resolved 3 critical stress concentration points before physical prototyping, reducing design iteration cycles by 35% through early simulation feedback integration

IIT(Institute_of Information Technology)

intern

IIT(Institute of Information Technology) • Temps plein

May 2026 - Jun 2026 • 1 mo

Research Intern — IIT Guwahati, Dept. of Mechanical Engineering Bilateral Sliding Mode Controller for Lower-Limb Exoskeleton | Supervisors: Prof. S.K. Dwivedy, Mr. Vivek Banjeet 05/2026– 06/2026 • Built and validated a bilateral sliding mode controller for a lower-limb rehabilitation exoskeleton driven by pneumatic-muscle actuators, reducing trajectory tracking error by 40% versus conventional PID control. • Modeled nonlinear force-length-pressure behavior of pneumatic muscles and integrated actuation dynamics into an embedded control framework across 6 degrees of freedom.