Je vais effectuer un service de fichier de tuning ECU avec WinOLS
Expert en tuning ECU WinOLS et optimisation du carburant
À propos de ce service
Je propose un service professionnel de fichiers ECU WinOLS pour la plupart des marques de voitures, y compris BMW, Mercedes, Audi, Volkswagen, Ford, Toyota, Nissan, Honda, et d’autres. Tout le tuning est effectué manuellement avec WinOLS (sans outils automatiques) pour garantir des performances sûres, fiables et optimisées.
Mes services incluent le tuning ECU Stage 1, pops and bangs, suppression EGR, suppression DPF/FAP, suppression AdBlue, suppression immo, et toutes solutions ECU personnalisées selon vos besoins. Je travaille sur une large gamme d’ECUs en mettant toujours l’accent sur la qualité et la sécurité.
Livraison rapide, support professionnel et résultats de haute qualité garantis. Votre satisfaction est ma priorité.
Mon portfolio
FAQ
Traduction automatique
De quoi avez-vous besoin de ma part pour commencer le réglage ?
J'ai besoin du fichier ECU original (BIN), de la marque de la voiture, du modèle, de l'année, du type de moteur et de la référence ECU.
Supportez-vous ma voiture ?
Je supporte la plupart des voitures à essence et diesel. Si vous n'êtes pas sûr, envoyez-moi un message avant de commander.
Le Stage 1 est-il sûr pour mon moteur ?
Oui, le Stage 1 est sûr lorsque la voiture est en bon état mécanique. Je respecte toujours les limites du moteur.
Travaillez-vous avec WinOLS ?
Oui, tous les fichiers sont modifiés professionnellement avec WinOLS, pas avec un logiciel automatique.
Pouvez-vous ajouter Pop & Bangs / Pops & Crackles ?
Oui, les Pop & Bangs sont disponibles sur les ECU supportés. Envoyez-moi un message pour confirmer la compatibilité.
Allez-vous supprimer DTC, EGR, DPF ou AdBlue ?
Oui, je peux supprimer DTC et certains systèmes lorsque cela est légalement autorisé. Demandez avant de commander.
Combien de temps faut-il pour recevoir mon fichier ?
Généralement entre 24 et 48 heures. La livraison express est disponible.
Proposez-vous des révisions ?
Oui, les révisions sont incluses jusqu'à ce que vous soyez satisfait, tant que le fichier ECU n'est pas modifié.
S'agit-il d'un réglage personnalisé ou d'un fichier de base de données ?
Il s'agit d'un fichier fait sur mesure, modifié manuellement pour votre ECU spécifique.
Pouvez-vous régler une ECU verrouillée ?
Je ne modifie que les fichiers ECU. Le déverrouillage/flasher doit être effectué par vous ou votre technicien local.
9 avis concernant ce service
| (6) | ||
| (2) | ||
| (0) | ||
| (0) | ||
| (1) |
Détails de la notation
- Niveau de communication avec le freelance
- Qualité de la livraison
- Valeur de la livraison
Trier par
P patrickpro731

États-Unis
so I had him tune my Toyota MR2 with a 2grfe and he was very quick and responsive. it is utilizing a haltech ECU. I sent him over the current file on the car and when he sent me over the new file I verified that changes were made by comparing the maps. still currently working on it but I have high hopes.
50 $US-100 $US
Prix
2 jours
Durée
Utile?J 
j_assis

Brésil
Everything went smoothly from start to finish. The map turned out very good, with noticeable improvements, and works perfectly. He has solid technical knowledge and understands ECU tuning very well. I highly recommend him and would work with him again.
Jusqu’à 50 $US
Prix
1 jour
Durée
Utile?G 
gustioliva

Italie
Commande annulée
I trusted him at the beginning, he asked me to grade the work even without being able to test the files. He promised to help me until the end and did not deliver, for each revision I requested he sent me identical files. He also tricked me into believing that the first files I received did not work because...
Jusqu’à 50 $US
Prix
8 jours
Durée
Utile?A 
azmahservices

Australie
I shared my BIN file for the BMW N63TU2 with Sayf for a custom remap. He was clear about the requirements, including the need for an A2L file, which I paid an additional $20 USD for. While I haven’t been able to test the file yet due to limitations on my end, the overall interaction was excellent. Sayf...
Jusqu’à 50 $US
Prix
4 jours
Durée
Utile?G 
gustioliva

Italie
This guy is amazing, I cannot give 5 stars because the file couldn't be written because of my device.
Jusqu’à 50 $US
Prix
6 jours
Durée
Utile?
9 avis concernant ce service
| (6) | ||
| (2) | ||
| (0) | ||
| (0) | ||
| (1) |
Détails de la notation
- Niveau de communication avec le freelance
- Qualité de la livraison
- Valeur de la livraison
Trier par
P patrickpro731

États-Unis
so I had him tune my Toyota MR2 with a 2grfe and he was very quick and responsive. it is utilizing a haltech ECU. I sent him over the current file on the car and when he sent me over the new file I verified that changes were made by comparing the maps. still currently working on it but I have high hopes.
50 $US-100 $US
Prix
2 jours
Durée
Utile?J 
j_assis

Brésil
Everything went smoothly from start to finish. The map turned out very good, with noticeable improvements, and works perfectly. He has solid technical knowledge and understands ECU tuning very well. I highly recommend him and would work with him again.
Jusqu’à 50 $US
Prix
1 jour
Durée
Utile?G 
gustioliva

Italie
Commande annulée
I trusted him at the beginning, he asked me to grade the work even without being able to test the files. He promised to help me until the end and did not deliver, for each revision I requested he sent me identical files. He also tricked me into believing that the first files I received did not work because...
Jusqu’à 50 $US
Prix
8 jours
Durée
Utile?A 
azmahservices

Australie
I shared my BIN file for the BMW N63TU2 with Sayf for a custom remap. He was clear about the requirements, including the need for an A2L file, which I paid an additional $20 USD for. While I haven’t been able to test the file yet due to limitations on my end, the overall interaction was excellent. Sayf...
Jusqu’à 50 $US
Prix
4 jours
Durée
Utile?G 
gustioliva

Italie
This guy is amazing, I cannot give 5 stars because the file couldn't be written because of my device.
Jusqu’à 50 $US
Prix
6 jours
Durée
Utile?

